本网站使用COOKIE来提高服务水平和保护用户。 
产品介绍
- TECHNICAL
- COMPANY
端铣刀
HOME > 产品介绍 > 端铣刀
GE series 石墨加工用 ㆍ Gra-Mate
- 2刃，石墨，非铁 加工用 金刚石涂层 平刀
-
- 2 FLUTE, DIAMOND COATING END MILL
- -在石墨及有色金属加工方面发挥卓越性能
| EDP. No. | D | L1 | L2 | L3 | D2 | D3 |
|---|---|---|---|---|---|---|
| GE00501006 | 0.5 | 1 | 6 | 50 | 0.45 | 4 |
| GE00601206 | 0.6 | 1.2 | 6 | 50 | 0.55 | 4 |
| GE00601210 | 0.6 | 1.2 | 10 | 50 | 0.55 | 4 |
| GE00701506 | 0.7 | 1.5 | 6 | 50 | 0.65 | 4 |
| GE00802006 | 0.8 | 2 | 6 | 50 | 0.75 | 4 |
| GE0100308 | 1 | 3 | 8 | 60 | 0.95 | 4 |
| GE0100310 | 1 | 3 | 10 | 60 | 0.95 | 4 |
| GE0100312 | 1 | 3 | 12 | 60 | 0.95 | 4 |
| GE0150412 | 1.5 | 4 | 12 | 60 | 1.45 | 4 |
| GE0200612 | 2 | 6 | 12 | 60 | 1.95 | 4 |
| GE0200612S6 | 2 | 6 | 12 | 60 | 1.95 | 6 |
| GE0250812 | 2.5 | 8 | 12 | 60 | 2.43 | 4 |
| GE0301012 | 3 | 10 | 12 | 60 | 2.9 | 4 |
| GE0301016 | 3 | 10 | 16 | 60 | 2.9 | 4 |
| GE0301012S6 | 3 | 10 | 12 | 60 | 2.9 | 6 |
| GE0301016S6 | 3 | 10 | 16 | 60 | 2.9 | 6 |
| GE04012S | 4 | 12 | - | 60 | - | 6 |
| GE0401216 | 4 | 12 | 16 | 60 | 3.9 | 6 |
| GE0401220 | 4 | 12 | 20 | 60 | 3.9 | 6 |
| GE0501520 | 5 | 15 | 20 | 60 | 4.8 | 6 |
| GE06020S | 6 | 20 | - | 60 | - | 6 |
| GE0602030 | 6 | 20 | 30 | 80 | 5.8 | 6 |
| GE0603050 | 6 | 30 | 50 | 15 | 5.8 | 6 |
| GE08025S | 8 | 25 | - | 70 | - | 8 |
| GE0802540 | 8 | 25 | 40 | 100 | 7.8 | 8 |
| GE0804070 | 8 | 40 | 70 | 150 | 7.8 | 8 |
| GE10030S | 10 | 30 | - | 80 | - | 10 |
| GE1003050 | 10 | 30 | 50 | 100 | 9.7 | 10 |
| GE1004580 | 10 | 45 | 80 | 160 | 9.7 | 10 |
| GE12030S | 12 | 30 | - | 80 | - | 12 |
| GE1203050 | 12 | 30 | 50 | 110 | 11.7 | 12 |
| GE1205080 | 12 | 50 | 80 | 160 | 11.7 | 12 |
适用被削材料
| 碳素钢 (S45C, S55C...) ~ HB225 |
合金钢 (SCM, SK...) HB225~325 |
前热处理钢 (NAK...) HRc30~50 |
热处理钢 | 铜 | 石墨 | 铸铁 FCD400. 500~ |
铝 | 不锈钢 | |
|---|---|---|---|---|---|---|---|---|---|
| ~HRc55 SKD61 | ~HRc55 SKD11 | ||||||||
| ◎ | ○ | ||||||||
容许公差
| 刃线部 (mm) | 柄部 |
|---|---|
| 0 ~ -0.03 | h6 |