本网站使用COOKIE来提高服务水平和保护用户。 
产品介绍
- TECHNICAL
- COMPANY
端铣刀
HOME > 产品介绍 > 端铣刀
WGE504 series 石墨加工用 ㆍ Gra-Mate
- 2刃，石墨，非铁 加工用 金刚石涂层 平刀
-
- 4 FLUTE, DIAMOND COATING, BALL NOSE ENDMILLS
- -对石墨、强化塑料等有色、非金属系列发挥卓越性能
| EDP. No. | D | L1 | L2 | D2 |
|---|---|---|---|---|
| WGE504 020 | 2.0 | 6 | 50 | 4 |
| WGE504 020 08 | 2.0 | 8 | 50 | 4 |
| WGE504 020 10 | 2.0 | 10 | 50 | 4 |
| WGE504 025 | 2.5 | 8 | 50 | 4 |
| WGE504 030 | 3.0 | 8 | 50 | 6 |
| WGE504 030 10 | 3.0 | 10 | 50 | 6 |
| WGE504 030 12 | 3.0 | 12 | 50 | 6 |
| WGE504 030 16 | 3.0 | 16 | 60 | 6 |
| WGE504 030 20 | 3.0 | 20 | 60 | 6 |
| WGE504 040 | 4.0 | 10 | 50 | 6 |
| WGE504 040 12 | 4.0 | 12 | 50 | 6 |
| WGE504 040 16 | 4.0 | 16 | 60 | 6 |
| WGE504 040 20 | 4.0 | 20 | 60 | 6 |
| WGE504 040 25 | 4.0 | 25 | 60 | 6 |
| WGE504 050 | 5.0 | 15 | 60 | 6 |
| WGE504 060 | 6.0 | 15 | 60 | 6 |
| WGE504 060 20 | 6.0 | 20 | 110 | 6 |
| WGE504 060 30 | 6.0 | 30 | 150 | 6 |
| WGE504 080 | 8.0 | 20 | 70 | 8 |
| WGE504 080 30 | 8.0 | 30 | 110 | 8 |
| WGE504 080 40 | 8.0 | 40 | 150 | 8 |
| WGE504 100 | 10.0 | 25 | 75 | 10 |
| WGE504 100 40 | 10.0 | 40 | 110 | 10 |
| WGE504 100 50 | 10.0 | 50 | 150 | 10 |
| WGE504 120 | 12.0 | 30 | 80 | 12 |
| WGE504 120 50 | 12.0 | 50 | 120 | 12 |
| WGE504 120 60 | 12.0 | 60 | 160 | 12 |
| WGE504 160 | 16.0 | 50 | 110 | 16 |
| WGE504 160 70 | 16.0 | 70 | 160 | 16 |
| WGE504 160 90 | 16.0 | 90 | 160 | 16 |
| WGE504 160 100 | 16.0 | 100 | 200 | 16 |
| WGE504 200 | 20.0 | 70 | 160 | 20 |
| WGE504 200 90 | 20.0 | 90 | 160 | 20 |
| WGE504 200 100 | 20.0 | 100 | 200 | 20 |
适用被削材料
| 碳素钢 (S45C, S55C...) ~ HB225 |
合金钢 (SCM, SK...) HB225~325 |
前热处理钢 (NAK...) HRc30~50 |
热处理钢 | 铜 | 石墨 | 铸铁 FCD400. 500~ |
铝 | 不锈钢 | |
|---|---|---|---|---|---|---|---|---|---|
| ~HRc55 SKD61 | ~HRc55 SKD11 | ||||||||
| ◎ | ○ | ||||||||
容许公差
| 刃线部 (mm) | 柄部 | |
|---|---|---|
| 外径 | 公差 | |
| 全规格 | 0 ~ -0.030 | h6 |