本网站使用COOKIE来提高服务水平和保护用户。 
产品介绍
- TECHNICAL
- COMPANY
端铣刀
HOME > 产品介绍 > 端铣刀
TE503 series 中硬度专用 ㆍ 瑞典
- 3刃， 锥颈，平刀
-
- 3 FLUTE, TAPER ENDMILL
- -工具钢、合金钢、模具钢及高硬度适合被削材
- -利用ALTiN涂层，耐磨性卓越
| EDP. No. | D | θ | L1 | N.D | L2 | D2 |
|---|---|---|---|---|---|---|
| TE50303106 | 3 | 1˚ | 10 | 3.4 | 50 | 6 |
| TE50303206 | 3 | 2˚ | 10 | 3.7 | 50 | 6 |
| TE50303306 | 3 | 3˚ | 10 | 4 | 50 | 6 |
| TE50303506 | 3 | 5˚ | 10 | 4.8 | 50 | 6 |
| TE50304106 | 4 | 1˚ | 15 | 4.5 | 50 | 6 |
| TE50304206 | 4 | 2˚ | 15 | 5 | 50 | 6 |
| TE50304306 | 4 | 3˚ | 15 | 5.6 | 50 | 6 |
| TE50304508 | 4 | 5˚ | 15 | 6.6 | 50 | 8 |
| TE50305106 | 5 | 1˚ | 20 (17.1) | 5.7 | 60 | 6 |
| TE50305208 | 5 | 2˚ | 20 (17.1) | 6.4 | 60 | 8 |
| TE50305308 | 5 | 3˚ | 20 (17.1) | 7.1 | 60 | 8 |
| TE50305508 | 5 | 5˚ | 20 (17.1) | 8.5 | 60 | 8 |
| TE50306108 | 6 | 1˚ | 20 | 6.7 | 60 | 8 |
| TE50306208 | 6 | 2˚ | 20 | 7.4 | 60 | 8 |
| TE50306308 | 6 | 3˚ | 20 | 8.1 | 60 | 8 |
| TE50306510 | 6 | 5˚ | 20 | 9.5 | 70 | 10 |
| TE50308110 | 8 | 1˚ | 25 (22.8) | 8.9 | 70 | 10 |
| TE50308210 | 8 | 2˚ | 25 (22.8) | 9.8 | 70 | 10 |
| TE50308312 | 8 | 3˚ | 25 (22.8) | 10.6 | 75 | 12 |
| TE50308512 | 8 | 5˚ | 25 (22.8) | 12.4 | 75 | 12 |
| TE50310112 | 10 | 1˚ | 35 | 11.2 | 90 | 12 |
| TE50310212 | 10 | 2˚ | 28 | 12.4 | 90 | 12 |
| TE50310314 | 10 | 3˚ | 35 (34.3) | 13.7 | 90 | 14 |
| TE50310516 | 10 | 5˚ | 35 (34.3) | 16.1 | 90 | 16 |
适用被削材料
| 碳素钢 (S45C, S55C...) ~ HB225 |
合金钢 (SCM, SK...) HB225~325 |
前热处理钢 (NAK...) HRc30~50 |
热处理钢 | 铜 | 石墨 | 铸铁 FCD400. 500~ |
铝 | 不锈钢 | |
|---|---|---|---|---|---|---|---|---|---|
| ~HRc55 SKD61 | ~HRc55 SKD11 | ||||||||
| ○ | ○ | ◎ | ○ | ○ | ○ | ||||
容许公差
| 刃线部 (mm) | 柄部 |
|---|---|
| ±0.02 | h6 |